diff --git a/R60ABD1/ESP32_R60ABD1_http_logger/ESP32_R60ABD1_http_logger.ino b/R60ABD1/ESP32_R60ABD1_http_logger/ESP32_R60ABD1_http_logger.ino
new file mode 100644
index 0000000..e99ca0c
--- /dev/null
+++ b/R60ABD1/ESP32_R60ABD1_http_logger/ESP32_R60ABD1_http_logger.ino
@@ -0,0 +1,287 @@
+//ESP8266
+//#include <ESP8266HTTPClient.h>
+//#include <ESP8266WiFi.h>
+//#define BrdMark "ESP8266"
+//const char *ap_id = "R60_8266_01";
+//const char *ap_id = "R60_GERMAN";
+
+// target - DOIT ESP32 DEVKIT V1
+#include <HTTPClient.h>
+#include <WiFi.h>
+#define BrdMark "ESP32"
+
+#include <WiFiClient.h>
+// office server
+//#define WFSSID "TP-Link_7C38" 
+//#define WFPSWD "36929092"
+// my home server
+#define WFSSID "Keenetic-6595"
+#define WFPSWD "1Q2w3e4r"
+// clinica WiFI
+//#define WFSSID "clinica"
+//#define WFPSWD "givemeaccessnow"
+// office WiFi
+//#define WFSSID "MediaMetrics_2.4g"
+//#define WFPSWD "germanklimenko"
+// German home
+//#define WFSSID "MTS_GPON_9f1ac0"
+//#define WFPSWD "D9a287k9"
+
+//const char* httpuri ="http://192.168.0.104:8080/pox";
+//const char* httpuri ="http://192.168.3.14/pox";
+const char* httpuri ="http://192.168.1.79/pox"; // home 25.03.2026
+//const char* httpuri ="http://aim.kwam.ru:8080/pox";
+//const char* httpuri ="http://195.201.126.70:8080/pox";
+//const char* httpuri ="http://activity206.li.ru/cgi-bin/radar.sh"; // Владимир
+const char *ap_id = "R60_02";
+
+#define LOOP_TIME 1000
+bool wifi_started = false;
+
+// Serial2
+#define RXD2 16
+#define TXD2 17
+#define BAUDRATE 115200 
+
+// MicRadar60 data block definitions
+#define BLK_HEAD_1 85
+#define BLK_HEAD_2 170
+#define DATA_READ_MAX_SIZE 64
+#define DATA_BLOCK_LEN 10
+
+#define DATA_BLOCK_MASK  89 // 0x59
+#define DATA_BLOCK_MASK_POS 1
+#define DATA_TYPE_MASK_POS 2
+#define CMD_TYPE_MASK_POS 3
+#define DATA_VALUE_POS 6
+#define HEAR_RATE_MASK 133 // 0x85
+#define BREATH_RATE_MASK 129 // 0x81
+#define SLEEP_VALUE_MASK 132 // 0x84
+#define HUMAN_DETECT_MASK 128 // 0x80
+#define PARSE_DATA_COUNT 4
+
+#define PARSE_DATA_COUNT 4
+enum{
+  hr_pos=0,
+  br_pos,
+  mv_pos,
+  dv_pos
+};
+uint8_t k=0,f=0, rf=0, rpos=0, i, s, dl=0, b1;
+uint8_t data_read[DATA_READ_MAX_SIZE], data_updt_flag[PARSE_DATA_COUNT];
+uint16_t data[PARSE_DATA_COUNT];
+
+
+uint32_t t_last;
+
+void setup() {
+  // Note the format for setting a serial port is as follows: Serial2.begin(baud-rate, protocol, RX pin, TX pin);
+  Serial.begin(BAUDRATE);
+  Serial2.begin(BAUDRATE, SERIAL_8N1, RXD2, TXD2);
+  pinMode(LED_BUILTIN, OUTPUT);
+  Serial.println("Serial Txd is on pin: "+String(TXD2));
+  Serial.println("Serial Rxd is on pin: "+String(RXD2));
+
+  Serial.printf("ESP32 Chip model = %s Rev %d\n", ESP.getChipModel(), ESP.getChipRevision());  
+  Serial.print("Chip ID: ");  
+  Serial.println(ESP.getEfuseMac());  
+
+  Serial.println("Start wifi  "+String(millis()));
+  wifi_started = startWiFiClient(); // time reading by firststart flag
+  if(wifi_started){
+    Serial.println("wifi started "+String(millis()));
+    digitalWrite(LED_BUILTIN, HIGH);
+    delay(1000);
+    digitalWrite(LED_BUILTIN, LOW);
+
+      // Получение мирового времени
+      Serial.print("Retrieving time: ");
+      configTime(0, 0, "pool.ntp.org"); // get UTC time via NTP
+      time_t now = time(nullptr);
+      while (now < 24 * 3600)
+      {
+        //Serial.print(".");
+        digitalWrite(LED_BUILTIN, HIGH);
+        delay(20);
+        digitalWrite(LED_BUILTIN, LOW);
+        delay(80);
+        now = time(nullptr);
+        //pisk(1);
+      }
+      Serial.println(now);
+    digitalWrite(LED_BUILTIN, HIGH);
+    delay(200);
+    digitalWrite(LED_BUILTIN, LOW);
+    delay(200);
+    digitalWrite(LED_BUILTIN, HIGH);
+    delay(200);
+    digitalWrite(LED_BUILTIN, LOW);
+    delay(200);
+    digitalWrite(LED_BUILTIN, HIGH);
+    delay(200);
+    digitalWrite(LED_BUILTIN, LOW);
+    delay(200);
+
+  }else{
+    Serial.println("can not started WiFi");
+  }
+ 
+  for(i = 0; i<PARSE_DATA_COUNT; i++){
+    data[i]=0;data_updt_flag[i]=0;
+  }
+  t_last = millis();
+}
+
+void loop() { //Choose Serial1 or Serial2 as required
+  while (Serial2.available()) {
+    k = uint8_t(Serial2.read());
+    //Serial.print(k);
+    //Serial.print(" ");
+    f=1;
+    if(rpos<DATA_READ_MAX_SIZE){
+      data_read[rpos]=k;
+      rpos++;
+    }
+  }
+  if(f==1){
+    //Serial.println(" ==================== ");
+    if(rpos>=DATA_BLOCK_LEN){
+      //if(data_read[DATA_BLOCK_MASK_POS]==DATA_BLOCK_MASK){
+        /*
+        if(data_read[DATA_TYPE_MASK_POS]==HUMAN_DETECT_MASK ){ //HUMAN_DETECT_MASK HEAR_RATE_MASK
+          for(i=0;i<rpos;i++){Serial.print(data_read[i]);Serial.print(" ");}
+          Serial.println();
+        }
+        */
+        switch(data_read[DATA_TYPE_MASK_POS]){
+          case HEAR_RATE_MASK:
+            //Serial.println("Heart block. ");
+            if(data_read[CMD_TYPE_MASK_POS] == 2){ // частота сердечных сокр-й
+              data[hr_pos] = data_read[DATA_VALUE_POS];
+              data_updt_flag[hr_pos] = 1;
+            }
+            break;
+          case BREATH_RATE_MASK:
+            //Serial.println("Breath block. ");
+            data[br_pos] = data_read[DATA_VALUE_POS];
+            data_updt_flag[br_pos] = 1;
+            break;
+          case HUMAN_DETECT_MASK:
+            //Serial.println("Human detect block. ");
+            if(data_read[CMD_TYPE_MASK_POS] == 3){ // движение тела
+              data[mv_pos] = data_read[DATA_VALUE_POS];
+              data_updt_flag[mv_pos] = 1;
+            }
+            if(data_read[CMD_TYPE_MASK_POS] == 4){ // расстояние до тела тела
+                data[dv_pos] = data_read[DATA_VALUE_POS]*256+data_read[DATA_VALUE_POS+1];
+                data_updt_flag[dv_pos] = 1;
+            }
+            break;
+        }
+      //}
+      //Serial.println();
+    }
+    f=0;
+    rf=0;
+    rpos=0;
+  }
+  if((millis() - t_last) >= LOOP_TIME){
+    bool rez = sendData();
+    Serial.print("Heart rate: ");
+    Serial.print(data[hr_pos]);Serial.print(" / ");Serial.print(data_updt_flag[hr_pos]); 
+    Serial.print(", Breath rate: ");
+    Serial.print(data[br_pos]);Serial.print(" / ");Serial.print(data_updt_flag[br_pos]); 
+    Serial.print(", Distance: ");
+    Serial.print(data[dv_pos]);Serial.print(" / ");Serial.print(data_updt_flag[dv_pos]); 
+    Serial.print(", Motion value: ");
+    Serial.print(data[mv_pos]);Serial.print(" / ");Serial.print(data_updt_flag[mv_pos]); 
+    Serial.print(" | ");
+    s = 0;
+    for(i = 0; i<PARSE_DATA_COUNT; i++){
+      Serial.print(data_updt_flag[i]);
+      s+=data_updt_flag[i];
+    }
+    Serial.print(" [ "); Serial.print(s);
+    for(i = 0; i<PARSE_DATA_COUNT; i++){
+      data_updt_flag[i]=0;
+    }
+    s=0;
+    for(i = 0; i<PARSE_DATA_COUNT; i++){
+      s+=data_updt_flag[i];
+    }
+    Serial.print(" / "); Serial.print(s); Serial.print(" ]");
+
+    t_last = millis();
+    Serial.println();
+  }
+}
+
+bool sendData(){
+  // send data to host
+  WiFiClient client;
+  time_t now = time(nullptr);
+  char fstr[16];
+  String ds = ap_id;
+  sprintf(fstr,"%lu", now);
+  ds += ", ";
+  ds += fstr;
+  sprintf(fstr,"%i", data[hr_pos]);
+  ds += ", ";
+  ds += fstr;
+  sprintf(fstr,"%i", data_updt_flag[hr_pos]);
+  ds += ", ";
+  ds += fstr;
+  sprintf(fstr,"%i", data[br_pos]);
+  ds += ", ";
+  ds += fstr;
+  sprintf(fstr,"%i", data_updt_flag[br_pos]);
+  ds += ", ";
+  ds += fstr;
+  sprintf(fstr,"%i", data[dv_pos]);
+  ds += ", ";
+  ds += fstr;
+  sprintf(fstr,"%i", data_updt_flag[dv_pos]);
+  ds += ", ";
+  ds += fstr;
+  sprintf(fstr,"%i", data[mv_pos]);
+  ds += ", ";
+  ds += fstr;
+  sprintf(fstr,"%i", data_updt_flag[mv_pos]);
+  ds += ", ";
+  ds += fstr;
+  ds += ", ";
+  ds += BrdMark;
+  HTTPClient http;    //Объявить объект класса HttpClient
+  http.begin(client, httpuri);      //Укажите адрес запроса
+  http.addHeader("Content-Type", "text/plain");  //Укажите заголовок типа содержимого
+  http.addHeader("Title", ds);  // так передадим ID датчика
+  Serial.println("Send data:");
+  Serial.println(ds);
+  int httpCode = http.POST(ds);   //Отправьте запрос
+  String payload = http.getString();                  //Получите полезную нагрузку ответа
+  Serial.println("HTTP answer:");
+  Serial.println(httpCode);   //Распечатать код возврата HTTP
+  Serial.println(payload);    //Полезная нагрузка для ответа на запрос печати
+  http.end();  //Закрыть соединение
+  if(httpCode==200){
+    return(true);
+  }else{
+    return(false);
+  }
+  return(true);
+}
+
+bool startWiFiClient()
+{
+  WiFi.mode( WIFI_STA);
+  WiFi.begin(WFSSID, WFPSWD);
+  int try_cnt = 0;
+  while ( WiFi.status() != WL_CONNECTED ) {
+    try_cnt++;
+    Serial.print(".");
+    delay ( 100 );
+    if(try_cnt>100){return(false);}
+  }
+  Serial.println("Connected"); 
+  return(true);
+}